Note: AR sometimes sourced different parts for overseas models…there is no exact record, unfortunately. Therefore, your parts for overseas models may not fit. If that is the case, you may return them, and I will make complete refund for all but shipping

Please contact Vinyl Nirvana if you have any questions about the parts and their installation.

• Drop-in fit (Integrates with existing wiring and screw patterns.)
• Low voltage
• Stainless steel shaft that helps reduce magnetic energy leakage
• Tighter bearing specifications with decreased endplay
• Detailed instructions included (and see video at link below)
• Available in 220v model~Addtl. $32.50 plus shipping.
• Note: Stock LED power-on lamp will no longer work
• See installation video at link below.
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Drop-in fit for all Hurst and Haydon Motors. Not Airpax.
• Reduces motor resonances
• Provides increased motor speed stability
• Individually CNC milled from high grade co-polymer and then hand finished
• Simple installation: see video at link below
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Out of Stock until October 2013
• Greatly reduces unwanted resonance over stock metal sub-chassis
• Vastly improved bearing well
• Individually CNC milled from highest quality terpolymers
• Individually hand assembled to exacting standards
• Hand finished
• Price includes machining for your tonearm
• Video on benefits of the Merrill Platter System
• Installation video
• For enlarged photos and specifications

(Please email for international shipping prices)

• Superior grade of stainless steel over the stock drive platter shaft
• Individually CNC milled to more exacting specifications
• Individually hand finished
• Price includes installation in your drive platter (You pay shipping)
• NOT suited for EB-101 without crescent armboard
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Individually CNC milled from highest quality stable acrylic
• Greatly reduces unwanted resonance over stock aluminum platter
• Drop in replacement
• Individually hand finished to exacting standards
• Recess machined on underside specifically for the AR drive platter
• Recommended to be combined with spindle upgrade to keep ample spindle length.
• Video explaining the Merrill Platter System
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Firmly holds lp to mat/platter allowing maximum retrieval of information from the grooves
• Damps edge energy before it travels back to the groove area
• Flattens most warped lps
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Out of Stock until October 2013
• Maximum damping capability
• Highly pliable to allow utmost contact between lp and mat
• Handmade from pure stamped lead individually selected for aesthetics
• Safety coated to prevent lead transfer
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Individually hand milled from high grade co-polymer and then hand finished to perfection
• Drastically restricts unwanted resonances from reaching tonearm
• Price includes machining for your tonearm, as well as new hardware for attachment
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Major upgrade to stock springs
• Allows improved adjustment and fine-tuning of sub-chassis
• More controlled “bounce”
• To experience full adjustment range, it is strongly recommended the springs be combined with new stud kit.
• See installation video this link
• For Enlarged Photos and Specifications

(Please email for international shipping prices)

• Major upgrade to stock studs
• Allows improved adjustment and fine-tuning of sub-chassis
• More controlled “bounce”
• For Enlarged Photos and Specifications and Installation Video

(Please email for international shipping prices)

Set of four upgrade replacement feet for mid-80′s AR Turntables: AR the Turntable, ES-1, EB-101 and ETL-1.

I take pride in my vintage turntable part sales. I spent time researching both the correct size foot and the correct size screw, so you don’t have to. These feet are high quality SBR rubber; you can feel the suppleness when you hold them. Each foot is reinforced with a metal washer to ensure a tight and enduring fit. Each screw is stainless steel and the serrated edge provides a tight “grab.” They are sized properly so as not to “split” the wood holding the foot (which in turn reinforces the plinth) which would be baaad news.

The new foot features SBR rubber which adds to isolation of the turntable from unwanted vibrations. If, for example, you chose vinyl replacement feet, there would be little isolation effect.

These upgrade feet sit slightly higher (approximately 1/4 inch) than the stock feet, which I think only enhances the appearance of your classic turntable.

Improved! Now larger than ever! Don’t risk stripping the threads in your valuable headshell. Get the right screws.

High quality cartridge mounting kit for AR XA and XB turntable headshells.

Click here for enlarged photos.

• Stable sound image.
• Better transient reponse.
• Less distortion.
• Deeper sound stage.
• Flattens mild warps
• Bren1 Website

(Please email for international shipping prices)

• Proprietary mix developed by George Merrill over decades of research
• Same bearing oil used in the Merrill-Scillia high end turntables
• 1 ounce should last a lifetime!

(Please email for international shipping prices)

• For mid-80′s tables only
• High quality plexi-glass
• Enlarged size accommodates Outer Peripheral Ring Clamp
• Fits existing hinges
• Trade-ins welcome
• Click here for larger photo
• $269 free shipping to lower 48 states

• Correctly sized to fit all AR turntables*
• Thoroughly researched and tested

*At this time we do not offer the small belt for the early two motor AR XA. However, this will replace the larger belt on those models.

The package includes:

• Mose metal case with ventilation

• Pre-installed Genuine Hercules II 33/45

• High quality 1.52 Meter or  5 feet  multi-core remote control cable .

• 7mm thick aluminum front panel

• Furutech AC mains socket cost

• “Starter” AC cable, able to be upgraded later

• Detailed instructions

Please note that shipping time can sometimes take as long as 10 to 14 business days.

More details here.

OK to delete

Gildan Ultra Cotton, 100% Cotton

Short Sleeve Only

Black

Large Back Logo~Front Only

Sizes: S, M, L, XL, XXL

Click here for more images