Another Turntable Offering

The Paisley...A Modded AR XA with new Rega RB-250 tonearm and other upgrades, $775

Why spend more to buy a refurbished AR turntable from Vinyl Nirvana?

Buying vintage electronic equipment on eBay can be a gamble. To better your chances at winning, you want two things: 1) Plenty of information about the auction item; and 2) A seller you can trust. When an AR turntable is refurbished by Vinyl Nirvana, it undergoes a multi-step inspection and tuning regimen. Ask another seller of aa AR table on Ebay these questions and see if you can get a response...

Is the motor running silently? Any unhealthy bearing noise?

Is the spindle straight? Was the spindle cleaned of old belt residue, which can cause rumble?

Does the belt properly interface with the spindle on both 33 and 45 rpm?

Is the belt new or in near mint condition?

Is the proper length belt installed? (Differences of less than an inch can result in speed changes.)

Is the proper width belt installed? (Differences can result in belt slippage or faulty change of speed.)

Has the platter bearing been inspected? Is it straight, true, and without significant wear?

Has the platter bearing well been inspected? Was it cleaned of old grease and contaminants? Was it properly lubed with appropriate oil?

Is the tonearm functioning properly? Any significant side-to-side motion, which can adversely affect tracking? Is range of motion appropriate? Is anti-skate functioning? Is appropriate tonearm weight installed?

Is cueing adjusted properly?

Was all wiring beneath the turntable inspected? Were worn solder joints re-soldered?

What is the condition of the AC cord? The interconnect cable?

Are springs in good working condition? Have worn springs been replaced? Has spring suspension been tuned? (This is an art learned through having set up dozens of these tables.)

Was the speed checked by strobodisc at 33 and 45 rpm?

Was headshell inspected? Is there any stripping? Do the cartridge screws hold tight? Are the leads brittle?

Is the tonearm rest original? Is it functioning properly?

Is a proper mat installed?

Is the base intact? Are the rubber feet intact?

If an AR table fails to pass any of the above inspections, Vinyl Nirvana corrects the problem before it gets listed. If the turntable is unsellable due to too many defects, it becomes a parts unit to be used in the restoration of other AR units. In addition to this multi-step inspection, each turntable is thoroughly detailed with appropriate cleaners. The average cleaning takes up to two hours. Though the tables Vinyl Nirvana sells will vary cosmetically, they will always be clean. Can you trust Vinyl Nirvana as a seller? Please read our ebay feedback (username ddarch44)regarding sales of turntables. Notice references to item exactly as described. Notice references to excellent packing. Notice references to our service and committment after the sale. And, just for fun, read about our two negative feedbacks...it takes all kinds.

This Week's Fully Modded AR XA

I am very excited to offer this AR XA turntable. It is most definitely a "one of a kind." I was inspired to create "The Paisley" when I was in a fabric shop with my wife and I saw this paisley faux leather. I recalled a turntable modder who used to cover the XA top in naugahyde. It not only looked great, it also added damping properties. The paisley, to me, harkened back to the late-sixties when XAs adorned many a dorm room filled with beads and peace signs. I bought the material, and what you see before you is the result!

Cosmetically, this specific table is an 8.0 on a scale of 1-10. (I'm a hard rater.) The real walnut veneer is in good shape with some minor scuffs.

Functionally, several mods have been undertaken. Most importantly, the entire motor drive has been updated. The weak Haydon motor has been replaced with a new Hurst one. Likewise, the XA supply has been upgraded with a Merrill line conditioner. (At the same time, the traditional XA power switch was removed.) On the underside of the subchassis, damping material was added. The springs were upgraded and the hard-to-adjust suspension nuts were upgraded to finger nuts

Buy this table, and be assured you own something that is ONE of a KIND, gorgeous to look at, and a sonic wonder.

The NEW Rega RB-250 arm

The arm itself is brand new. The box, packing, and manual will be included. The arm was mounted on a custom acrylic armboard. What more can be said about the amazing RB-250? Do a google search and see all the good that's been written about this giant killer.

If desired, I can upgrade the arm to a new RB-300 or upgrade the present arm with an improved stud and counterweight. Email for price and details.

Cartridge Options

Price does not include cartridge. Please email to discuss options.

The Details

The shipping included price is for the lower 48 states only. This table will be packed like it is a fragile pane of glass. I simply care too much for these tables to just shove them in a box. I will carefully pack the table in extra sturdy boxes. and bubble wrap. I prefer Fedex Ground. Lastly, I am truly not in this for the money. What I love best is introducing someone new to the joys of vinyl, getting someone back into vinyl who left it for the "superiority" of cds, or helping someone else who does appreciate it to "move up." In that regard, I do what few sellers do...if the buyer needs it, I can supply up to one hour of help by phone with set up. (At a mutually arranged time.) In general, most buyers don't need it, but if there IS a problem, I am there.

Some recent comments from buyers....

"Outstanding & dedicated craftsman. Helpful hints. Personal attention."

"The best! A great communicator who goes above and beyond in the service dept."

"If you want an excellent reconditioned vintage turntable, Dave's the Man! Thanks"

"When eBay was invented, nobody dreamed there'd be a seller as great as Dave!!"

Email me if you are interested in purchasing this turntable or another one I have slated for restoration.