Another Turntable Offering

AR The Turntable w/ Linn Basik Plus Tonearm, Acrylic Platter, and other Mods

Why spend more to buy a refurbished AR turntable from Vinyl Nirvana?

Buying vintage electronic equipment on eBay can be a gamble. To better your chances at winning, you want two things: 1) Plenty of information about the auction item; and 2) A seller you can trust. When an AR turntable is refurbished by Vinyl Nirvana, it undergoes a multi-step inspection and tuning regimen. Ask another seller of aa AR table on Ebay these questions and see if you can get a response...

Is the motor running silently? Any unhealthy bearing noise?

Is the spindle straight? Was the spindle cleaned of old belt residue, which can cause rumble?

Does the belt properly interface with the spindle on both 33 and 45 rpm?

Is the belt new or in near mint condition?

Is the proper length belt installed? (Differences of less than an inch can result in speed changes.)

Is the proper width belt installed? (Differences can result in belt slippage or faulty change of speed.)

Has the platter bearing been inspected? Is it straight, true, and without significant wear?

Has the platter bearing well been inspected? Was it cleaned of old grease and contaminants? Was it properly lubed with appropriate oil?

Is the tonearm functioning properly? Any significant side-to-side motion, which can adversely affect tracking? Is range of motion appropriate? Is anti-skate functioning? Is appropriate tonearm weight installed?

Is cueing adjusted properly?

Were electrical connections cleaned and inspected? Headshell leads? Tonearm recepticle? RCA plugs? (Dirty connections can contribute to hum problems.) Are all connections tight? ( I use Dexoit products, highly recommended.)

Is transport screw intact? Is it functioning properly?

Are dust cover hinges intact and not stripped?

Was all wiring beneath the turntable inspected? Were worn solder joints re-soldered?

What is the condition of the AC cord? The interconnect cable?

Are springs in good working condition? Have worn springs been replaced? Has spring suspension been tuned? (This is an art learned through having set up dozens of these tables.)

Was the speed checked by strobodisc at 33 and 45 rpm?

Was headshell inspected? Is there any stripping? Do the cartridge screws hold tight? Are the leads brittle?

Is the tonearm rest original? Is it functioning properly?

Is a proper mat installed?

Is the base intact? Are the rubber feet intact?

If an AR table fails to pass any of the above inspections, Vinyl Nirvana corrects the problem before it gets listed. If the turntable is unsellable due to too many defects, it becomes a parts unit to be used in the restoration of other AR units. In addition to this multi-step inspection, each turntable is thoroughly detailed with appropriate cleaners. The average cleaning takes up to two hours. Though the tables Vinyl Nirvana sells will vary cosmetically, they will always be clean. Can you trust Vinyl Nirvana as a seller? Please read our ebay feedback (username ddarch44)regarding sales of turntables. Notice references to item exactly as described. Notice references to excellent packing. Notice references to our service and committment after the sale. And, just for fun, read about our two negative feedbacks...it takes all kinds.

This Week's AR "The Turntable"

I am very excited to offer this turntable for sale. It is without a doubt THE nicest AR The Turntable I have been privileged to offer. In addition, it features a super rare custom acrylic platter and an upgraded inner platter.

Cosmetically, this table is an 9.0 on a scale of 1-10. (Those who follow my sales know how few times I have listed a table as a "nine.") The real wood Walnut veneer is in excellent shape with very little sign of wear. Fortuitously, in addition to there being almost no signs of wear, this unit also sports some of the most attractive walnut veneer I've seen on any AR product. (Look at the area beneath the tonearm. Just gorgeous.) The metal portion of the plinth is in very good shape with some light wear on two edges. These are mostly covered by the platter. The dustcover is lightly scratched and scuffed, but is overall very good to excellent in appearance.

As outlined above, this unit passed a multi-step inspection and cleaning process. Anything that needed to be replaced, adjusted, or cleaned was accomplished. In addition, as noted above, the entire platter assembly is upgraded. First, the metal outer platter has been upgraded to an acrylic one. These acrylic platters, specially machined to fit the AR inner platter, are super rare. This, in fact, is the only one I own. Speaking of the inner platter, this was upgraded by Anthony Scillia himself. A new Stainless steel shaft featured on my mods page. The platter was also sound-deadened by Anthony himself with a special compound.

The result? Truly an exceptional turntable that competes with tables starting in the fifteen hundred dollar range. The improved platter assembly blackens the background, and the Linn Basik Plus arm fills it will sonic sweetness.

If you purchase this table, we can discuss cartridge options as part of the sale. I highly recommend the Ortofon Super OM-20 for $209. mounted and aligned. (See Needle Doctor for details on the OM-20. Retail is $195.)

The Tonearm

The Linn Basik Plus is an outstanding tonearm that mates well with the AR table. It is a stellar upgrade from the stock AR arm. Better bearings, more rigid construction, finer machining. This particular arm is in excellent condition. The only visible wear is on the headshell. It has 100% functionality.

The Details

The shipping included price is for the lower 48 states only. This table will be packed like it is a fragile pane of glass. I simply care too much for these tables to just shove them in a box. I will carefully pack the table in extra sturdy boxes. and bubble wrap. I prefer Fedex Ground. Lastly, I am truly not in this for the money. What I love best is introducing someone new to the joys of vinyl, getting someone back into vinyl who left it for the "superiority" of cds, or helping someone else who does appreciate it to "move up." In that regard, I do what few sellers do...if the buyer needs it, I can supply up to one hour of help by phone with set up. (At a mutually arranged time.) In general, most buyers don't need it, but if there IS a problem, I am there.

Some recent comments from buyers....

"Outstanding & dedicated craftsman. Helpful hints. Personal attention."

"The best! A great communicator who goes above and beyond in the service dept."

"If you want an excellent reconditioned vintage turntable, Dave's the Man! Thanks"

"When eBay was invented, nobody dreamed there'd be a seller as great as Dave!!"

Email me if you are interested in purchasing this turntable or another one I have slated for restoration.